If you are looking up 2a reconciliation in tally prime, you want the steps rather than a sales page. They are below. What follows them is a comparison you can ignore if the walkthrough was all you needed.
Reconciling GSTR-2A and 2B against your purchases
This is the job that decides how much input credit you actually get, and it is worth doing monthly rather than annually.
- Download the GSTR-2B statement for the period from the GST portal. 2B is the static, credit-relevant statement; 2A moves as suppliers file.
- Open the reconciliation view under the GST reports and load the downloaded file.
- Work through the mismatches by category: invoices you recorded that the supplier has not reported, invoices they reported that you have not recorded, and invoices where the value or the tax differs.
- Fix your own side first — typos in the supplier invoice number and date cause a surprising share of "missing" entries.
- For invoices genuinely not filed by the supplier, chase the supplier. No software can create the credit; only their filing can.
- Keep the reconciliation working file. When a notice arrives eighteen months later, it is the only thing that reconstructs what you did.
Match on supplier GSTIN plus invoice number plus date, not on amount. Amounts collide; that combination does not.
On TallyPrime specifically
TallyPrime reorganised how you move around the product rather than how the accounting works. The go-to search, the ability to change a report's view without leaving it, and the rework of the data-entry screens mean most older instructions give you the right idea and the wrong keystrokes.
So when following a guide written for the previous generation, follow the intent rather than the key sequence: the ledger still needs the same fields, the invoice still needs the same content, and the exceptions list in the GST report is still where the return actually gets fixed.
What is worth checking on any current release is the compliance side rather than the interface — whether your installation is up to date for the return formats and the e-invoicing schema in force. An out-of-date installation does not announce itself; it produces a file the portal rejects, or one it accepts with figures in the wrong column.
Data from the earlier generation migrates, but migration is a one-way step and worth doing from a backup you have verified rather than from the live company data.
When this is worth doing differently
None of the above is difficult. It is just a lot of setup that has to stay correct, on a machine that has to stay working, maintained by someone who remembers how it was configured.
That is a reasonable cost for a business with an accountant on staff and a stable office. It is a poor fit for a business where the person billing is also the person selling, and where the office computer is whatever laptop is nearest.
Billixo takes the other approach: the GST details are entered once when you sign up, the tax split is derived from the customer’s state on every invoice with nothing to configure, and there is no installation to maintain. It runs in a browser, and the free plan costs ₹0 with no card.
That is not an argument that one is better. It is an argument that they suit different situations, and it is worth knowing which one you are in.
The same job, without the setup
In Billixo, the equivalent of everything above is: enter your GSTIN and state once at signup, put the HSN on a product when you create it, and select the customer when you bill.
The tax heads are not ledgers you create — they are derived from the place of supply against your registration state, every time, with no dropdown to get wrong. The GST summaries are a report you download rather than a screen you have to clear.
You can test that claim in about ten minutes on the free plan without installing anything. Start free now, or open the demo.
What a GST invoice legally has to carry
Rule 46 of the CGST Rules sets out what a tax invoice must show, and it is a longer list than most invoice templates carry. Getting one field wrong does not usually cost you anything the day you raise it — it costs your customer their input credit months later, which is a harder conversation.
The fields are:
- Your name, address and GSTIN
- A consecutive invoice number, unique within the financial year
- The date of issue
- The customer's name, address and GSTIN where they are registered
- Place of supply, and the state code, for inter-state supplies
- HSN or SAC against every line
- Description, quantity, unit, rate and taxable value per line
- Rate and amount of CGST, SGST/UTGST, IGST and cess, shown separately
- Whether tax is payable on reverse charge
- Signature or digital signature of the supplier or an authorised person
Billixo fills these in from the customer and product records rather than asking you to remember them, which is the only reliable way a busy counter gets them all right every time.
CGST, SGST and IGST — worked out, not chosen
Whether a sale attracts CGST and SGST or IGST is not a preference. It follows from the place of supply: same state as your registration means the tax splits into central and state halves, a different state means one integrated tax at the combined rate.
That sounds simple and goes wrong constantly, because it is a dropdown in most billing software and a dropdown is something a tired person clicks past. In Billixo the split is derived from the state on the customer record against the state on your registration, and it changes the moment either does.
The consequence of getting it wrong is real: an IGST invoice raised as CGST/SGST has to be credited and reissued, and if the return has already gone in, amended.
The AI, and what it is actually for
The useful application of AI to billing is not a chatbot. It is the twenty minutes a day spent retyping things that already exist on paper.
- Scan a supplier bill. Photograph it; the lines, the GSTIN, the tax and the totals come back as a draft you check rather than a form you fill.
- Find the HSN code. Describe the product in plain words and get a code to confirm, instead of scrolling a list of eleven thousand.
- Ask about your own numbers. "What is outstanding over sixty days?" answered from your data, not a manual.
- Write the reminder. A polite, specific chase for an overdue invoice, ready to send on WhatsApp.
Nothing is sent anywhere until you ask for it, and the platform runs on whichever model it has been configured with — including one hosted on your own server.
Who this actually suits
It fits a business that raises between a handful and a few hundred invoices a month and would rather not think about GST between the 10th and the 20th: traders, distributors, retail counters, workshops, agencies, consultants, contractors and manufacturers who sell on invoice.
It fits less well if you need deep manufacturing costing, multi-currency consolidation, or payroll — those are different products, and pretending otherwise wastes your evaluation time.
If you are not sure which side of that line you fall on, the free plan answers it in an afternoon at no cost. Start free now.
What "free" means here, exactly
The Free plan costs nothing, needs no card, and has no expiry date. It is not a trial that turns into a bill; it is a plan you can run a small business on indefinitely.
What it gives you:
- Real GST invoices with the full Rule 46 field set
- Customers and products, with HSN/SAC held against each
- A daily and monthly invoice allowance, generous enough for a small operation
- One login
- Export of your own data, whenever you want it
What it does not give you:
- A watermark-free PDF
- GSTR-1 and GSTR-3B export
- The AI features — bill scanning, HSN lookup, the assistant
- Extra team logins, bulk import, recurring invoices and reminders
Every new account also gets the full paid feature set for its first 14 days, so you can see what the ceiling looks like before deciding whether you need it. When that ends nothing is charged and nothing is deleted — the account simply settles onto Free.
Start free now — it takes an email address and about a minute.
Where your data lives
On the server this platform is installed on. Every record carries a company identifier and every query is scoped to the signed-in account at the framework level, so one business cannot read another’s data by any route, including a crafted one.
Sign-in is rate limited, sessions can be restricted to one device per user, and passwords are stored hashed. Exports are available on every plan, free included: if you ever want to leave, your data leaves with you.
Frequently asked questions
Is there a simpler way to do this?
For many small businesses, yes. Billixo derives the tax split from the customer’s state automatically and needs no ledger setup at all — you enter your GSTIN once and bill. It runs in a browser, and the free plan costs ₹0 with no card.
Can I use both?
Yes, and many businesses do. Raise invoices wherever it is fastest and hand your accountant a clean GSTR-1 summary. The hand-off is a file, not a commitment.
Will I lose my data if I move?
No. Export your party and item lists to CSV or Excel, import them in one pass, and carry unpaid invoices as opening balances. Keep the old system readable for a year — most businesses never migrate historic invoices at all.
Does it work on a phone?
Yes. It is a browser application that adapts to the screen, so the same account works from a desktop at the counter and a phone in the market. There is no separate app to keep in step.
Can more than one person use it?
On the paid plans, yes — team logins with their own credentials. The Free plan is a single login, which suits a one-person operation and is usually the first limit a growing business hits.
Try it — the demo is the product
There is no sales call and no scheduled demo, because a recorded walkthrough of somebody else’s data tells you nothing about your own. Open an account instead and raise a real invoice for a real customer; it takes about a minute and costs nothing.
Open the software demo → — sign in, or create a free account from the same screen.
See full details on the home page → — features, the AI, pricing and the answers to the usual questions.
Related pages