Reconciliation is downstream of data entry. Everything that makes gst2a reconciliation software painful was created weeks earlier, when a supplier invoice number was typed slightly wrong. Here is how to do both halves properly.
Why credit actually goes missing
Input credit depends on the supplier having reported the invoice. Your own record, however accurate, does not create it.
That means reconciliation is not really a matching exercise, it is an early-warning system: the sooner you know a supplier has not filed, the more leverage you have while the payment is still outstanding.
Businesses that reconcile monthly recover most of what they are owed. Businesses that reconcile annually discover the problem when the supplier no longer cares.
GSTR-2A: a statement that keeps moving
GSTR-2A is not a return you file. It is a dynamic statement the portal assembles from what your suppliers have reported about supplies made to you — and because it is dynamic, it changes as they file, including for periods you closed months ago.
That is both its use and its limitation. It is good for seeing what has turned up since you last looked and for chasing a supplier who has not filed. It is awkward as the basis of a credit claim, precisely because a figure you reconciled in May is not necessarily the same figure in July.
Which is why GSTR-2B exists alongside it: a static statement generated once per period, which is what a claim should be matched against. The sensible division is to claim against 2B and use 2A to watch what is still arriving.
If you are reconciling 2A, match on supplier GSTIN plus invoice number plus date rather than on amount. Amounts collide between invoices; that combination does not.
What Billixo does to reduce the work
- AI bill scanning. Photograph the supplier bill and the GSTIN, invoice number, date, lines and tax come back as a draft — no retyping, so no transcription mismatch.
- Supplier records with GSTIN and state, held once and reused, so the same supplier is never entered two slightly different ways.
- Purchase entries that keep the supplier’s own invoice number and date, exactly as printed, which is what the match is made on.
- Correct tax heads on purchases, derived from the supplier’s state rather than chosen.
- Period discipline, so a purchase booked into the wrong month is visible rather than silent.
- Exports in CSV, Excel and JSON, so your reconciliation can happen wherever you or your CA prefer.
A reconciliation method that finishes
- Download GSTR-2B for the period from the GST portal.
- Export your own purchase register for the same period.
- Match on supplier GSTIN + invoice number + invoice date. Do not match on amount — amounts collide, that combination does not.
- Normalise the obvious differences first: leading zeros, slashes, spacing in invoice numbers. A surprising share of "missing" invoices are the same invoice written two ways.
- Split the remainder into the four categories above.
- Fix everything on your side — wrong period, wrong number, unrecorded purchase.
- Chase the suppliers who have genuinely not filed, while you still owe them money.
- Keep the working file. When a notice arrives eighteen months later, it is the only thing that reconstructs what you did and why.
The cheapest reconciliation is the one you avoid
Every hour spent reconciling is an hour spent finding transcription errors. The way to spend fewer of them is to stop transcribing.
That is the strongest practical argument for scanning supplier bills rather than typing them: the invoice number and date come off the document itself, which is precisely the field pair the match is made on.
Businesses that scan their purchase bills report the same thing — the reconciliation does not become clever, it becomes short, because the only remaining mismatches are the real ones.
When to do it, and who should
Monthly, close to the filing date, by whoever entered the purchases — not by the CA in a batch at year end.
The person who entered the bill can look at a mismatch and remember the transaction. Someone reconciling nine months later can only see two rows that do not agree, and will make the safest assumption, which is usually to give up the credit.
This is the one compliance job where doing it yourself is genuinely cheaper than delegating it.
Invoice numbering: one unbroken series per year
The invoice number has to be consecutive, unique within the financial year, and no more than sixteen characters of letters, numbers, slashes and hyphens. Gaps invite questions. Duplicates cause them.
This is the single most common reason a spreadsheet-based billing setup fails an audit: two people billing on two machines, both starting from the last number they remember. A system that issues the number centrally cannot make that mistake.
The series restarts on 1 April, and Billixo restarts it for you rather than waiting to be told.
Credit notes, debit notes, and fixing a wrong invoice
An issued tax invoice is not something to edit. If the value was too high, or goods came back, the correction is a credit note that references the original invoice. If it was too low, a debit note. Both carry their own numbers and both appear in your return.
There is a deadline on the credit note that matters: the adjustment has to be declared by the return for the relevant month of the following financial year, or by the annual return, whichever comes first. Past that, the note exists commercially but the tax cannot be adjusted.
Software that lets you quietly retype an invoice raised last month is not doing you a favour.
Bill scanning, in practice
The single largest time cost in most small businesses is not raising invoices — it is entering purchases. A photograph of a supplier bill goes in and a structured draft comes out: supplier, GSTIN, line items, rates, tax split and total.
You check it. That is the workflow, and it is deliberate: an extraction you did not read is a liability, not a saving. But checking a filled form takes fifteen seconds and typing one takes three minutes, and that difference compounds over a month of purchases.
A note for accountants and CAs
If you are the person who has to make sense of a client’s billing at the end of the month, what you need from their software is narrow and specific: a complete outward supply summary, correct place-of-supply treatment, HSN present on every line, and an export you can open without repair.
Billixo produces GSTR-1 and GSTR-3B summaries and exports to CSV, Excel and JSON. Client-side, the invoice fields cannot be skipped, which removes the category of problem where the data was never captured in the first place.
What "free" means here, exactly
The Free plan costs nothing, needs no card, and has no expiry date. It is not a trial that turns into a bill; it is a plan you can run a small business on indefinitely.
What it gives you:
- Real GST invoices with the full Rule 46 field set
- Customers and products, with HSN/SAC held against each
- A daily and monthly invoice allowance, generous enough for a small operation
- One login
- Export of your own data, whenever you want it
What it does not give you:
- A watermark-free PDF
- GSTR-1 and GSTR-3B export
- The AI features — bill scanning, HSN lookup, the assistant
- Extra team logins, bulk import, recurring invoices and reminders
Every new account also gets the full paid feature set for its first 14 days, so you can see what the ceiling looks like before deciding whether you need it. When that ends nothing is charged and nothing is deleted — the account simply settles onto Free.
Start free now — it takes an email address and about a minute.
Reliability, backups and getting your data out
Cloud billing software is only as good as its worst day. Two things matter more than any feature list: that your data is backed up somewhere you can reach, and that you can export it in a format something else can read.
Exports here are CSV, Excel and JSON, on every plan including the free one, covering customers, products, invoices and payments. That is the honest test of whether software respects you — not what it promises, but what it lets you take when you leave.
Frequently asked questions
Should I reconcile against 2A or 2B?
Against 2B for credit decisions, because it is static for the period. Use 2A to understand why something is or is not appearing, since it updates as suppliers file.
What should I match on?
Supplier GSTIN, invoice number and invoice date together. Matching on amount produces false positives constantly, because round numbers repeat.
My supplier has not filed. What can I do?
Nothing in software creates the credit — only their filing does. What you can do is find out early, while their payment is still outstanding, which is the practical argument for reconciling monthly rather than annually.
Are the invoices valid for GST?
Yes. Every invoice carries the fields Rule 46 requires — GSTIN, HSN/SAC on each line, place of supply, the correct CGST/SGST or IGST split, and a consecutive invoice series that restarts each financial year.
Can I move my existing customers and products in?
Yes. Bulk import from CSV or Excel on any paid plan, and export back out in CSV, Excel or JSON at any time, including on Free. Most people bring their party and item lists across in one pass and carry outstanding invoices as opening balances.
Try it — the demo is the product
There is no sales call and no scheduled demo, because a recorded walkthrough of somebody else’s data tells you nothing about your own. Open an account instead and raise a real invoice for a real customer; it takes about a minute and costs nothing.
Open the software demo → — sign in, or create a free account from the same screen.
See full details on the home page → — features, the AI, pricing and the answers to the usual questions.
Related pages